rubber accelerator

Trustone Chemical Industry

All Products >> rubber accelerator

Showing 1 - 8 of 8, total 1 pages [First] [Previous] [Next] [Last]

rubber accelerator zdmc-80
Specification: 80% Zinc dimethyl dithiocarbamate
Detail: ZDMC-80 is an ultra-accelerator for the vulcanization of natural and synthetic rubbers. In order to avoid blooming, it is always used together with other carbamates and kept the dosage under 1phr, especially suitable for IIR a...

rubber accelerator tmtd-75
Specification: 75% tetramethylthiuram disulfide
Detail: TMTD-75 can act as ultra accelerator for natural rubber and synthetic rubber, as well as a vulcanizing agent for sulfur-less or low-sulfur curing systems, especially applied to shoes, cables and other industry products

rubber accelerator tbztd-75
Specification: 75% tetrabenzyl thiuram disulphide
Detail: TBzTD-75 is an ultra accelerator for the vulcanization of natural and synthetic rubber. It is sulfur donor without any carcinogenic ammonium nitrite in using process. It can also act as a vulcanizing agent for without free sul...

rubber accelerator tbbs-80
Specification: 80% N-tertbutyl-2-benzothiazole sulfenamide
Detail: Basic accelerator for sulfur-cured diene rubbers, e.g. EPDM, NR, BR, SBR, especially for tire and anti-vibration applications.

rubber accelerator mbts-80
Specification: 80% mercaptobenzothiazole disulfide
Detail: MBTS-80 is a semi-ultra accelerator for natural rubber and synthetic rubber, which is always used in combination with other types of accelerator. It can act as anti-scorching agent in CR formula. It’s very suitable for foami...

rubber accelerator mbt-75
Specification: 80% 2-mercaptobenzothiazole
Detail: MBT-80 is a semi-ultra, multi-purpose accelerator with a plateau curing characteristic, which has retarding effect in CR compounds. It’s ideal for foam products and low-hardness products, which can reduce the scrap rate of f...

rubber accelerator etu-80
Specification: 80% N,N-Ethylene Thiourea;20% EPDM/EVA binder and dispersing ag
Detail: ETU-80 is an accelerator that very suitable for polychloroprene rubber, as well as EPDM, ECO and CM. It's very suitable in vulcanization system with metal oxides, especially magnesium oxide and zinc oxide.

rubber accelerator cbs
Specification: 80% N-cyclohexyl-2-benzothiazyl sulphenamide, 20% EPDM/EVA binde
Detail: Basic accelerator for sulfur-cured diene rubbers, e.g. EPDM, NR, BR, SBR, especially for application in tires and anti-vibration elements


Showing 1 - 8 of 8, total 1 pages [First] [Previous] [Next] [Last]
1

Trustone Chemical Industry All Products >> rubber accelerator

Trustone Chemical Industry

All Products >> rubber accelerator