Trustone Chemical Industry

Showing 1 - 10 of 14, total 2 pages [First] [Previous] [Next] [Last]

rubber curing resins xlt-55
Specification: 41.8% bromine methyl tertiary butyl phenolic resin 26.2%Zinc oxi
Detail: XLT-55 is a curing agent for butyl and other rubbers, especially suitable for the vulcanization of bladders and curing bags based on IIR. Since this resin contains a halogen in its chemical structure, no additional halogen is ...

rubber accelerator zdmc-80
Specification: 80% Zinc dimethyl dithiocarbamate
Detail: ZDMC-80 is an ultra-accelerator for the vulcanization of natural and synthetic rubbers. In order to avoid blooming, it is always used together with other carbamates and kept the dosage under 1phr, especially suitable for IIR a...

rubber accelerator tmtd-75
Specification: 75% tetramethylthiuram disulfide
Detail: TMTD-75 can act as ultra accelerator for natural rubber and synthetic rubber, as well as a vulcanizing agent for sulfur-less or low-sulfur curing systems, especially applied to shoes, cables and other industry products

rubber accelerator tbztd-75
Specification: 75% tetrabenzyl thiuram disulphide
Detail: TBzTD-75 is an ultra accelerator for the vulcanization of natural and synthetic rubber. It is sulfur donor without any carcinogenic ammonium nitrite in using process. It can also act as a vulcanizing agent for without free sul...

rubber accelerator tbbs-80
Specification: 80% N-tertbutyl-2-benzothiazole sulfenamide
Detail: Basic accelerator for sulfur-cured diene rubbers, e.g. EPDM, NR, BR, SBR, especially for tire and anti-vibration applications.

rubber accelerator mbts-80
Specification: 80% mercaptobenzothiazole disulfide
Detail: MBTS-80 is a semi-ultra accelerator for natural rubber and synthetic rubber, which is always used in combination with other types of accelerator. It can act as anti-scorching agent in CR formula. It’s very suitable for foami...

rubber accelerator mbt-75
Specification: 80% 2-mercaptobenzothiazole
Detail: MBT-80 is a semi-ultra, multi-purpose accelerator with a plateau curing characteristic, which has retarding effect in CR compounds. It’s ideal for foam products and low-hardness products, which can reduce the scrap rate of f...

rubber accelerator etu-80
Specification: 80% N,N-Ethylene Thiourea;20% EPDM/EVA binder and dispersing ag
Detail: ETU-80 is an accelerator that very suitable for polychloroprene rubber, as well as EPDM, ECO and CM. It's very suitable in vulcanization system with metal oxides, especially magnesium oxide and zinc oxide.

curing resins xlt-45
Specification: 46.7% tert octyl phenolic resin 23.2% Zinc oxide 30.1% IIR binde
Detail: XLT-45 is a curing agent for butyl and other rubbers, especially suitable for the vulcanization of bladders and curing bags based on IIR. The addition of a halogen donor, usually 5phr of polychloroprene, is recommended. Since ...

retarders ctp-80
Specification: 80% N-cyclohexylthiophthalimide, 20% EPDM/EVA binder and dispers
Detail: CTP-80 is a scorch retarder for NR and SR, which can be used together with all sulfenamide types or thiazole type accelerators to control process safety and avoid incipient cure, without any influence on vulcanization characte...


Showing 1 - 10 of 14, total 2 pages [First] [Previous] [Next] [Last]
1 2